With the emergence of other materials such as aluminum clip ceiling, PVC clip ceiling gradually lost its glory. However, in recent years, with technological improvements, the performance of PVC clip ceiling has undergone significant changes and it has become a commonly used decorative material for kitchen and bathroom ceilings in recent years. The installation of PVC clip board ceiling first depends on which type of ceiling you choose. Traditional ceilings are slightly more difficult, while integrated ceilings are relatively easier.
PVC Ceilng Panel
Installation steps of PVC clip board ceiling
Firstly, determine the installation position of the PVC ceiling panel. First, draw lines around the wall to determine the height of the ceiling. The height of the ceiling cannot be too low, as it will reduce the sense of space and make people feel depressed. After determining the position, mark it with ink lines as the reference line.
Then, measure the area of the ceiling and determine the size specifications of the PVC ceiling panel. Afterwards, it is necessary to determine the position of the keel line, which should be above the reference line. The keel mainly serves as a support, used to fix the structure and ensure a firm installation. Install the keel, drill holes in the wall, first install the side keel, and then proceed to the main keel. The distance between the main keel and the side keel should be carefully controlled, preferably around 80 centimeters. The horizontal position between the main keel and the side keel needs to be adjusted, which can be achieved through the construction line.
Installation steps of PVC ceiling panel.
After installing the keel, the next step is to install the PVC ceiling panel. However, when installing the PVC ceiling panel, it is important to pay attention to the strength, as excessive force can damage the surface structure of the ceiling panel
Precautions for installation of PVC ceiling panel
1. First, install the tiles in the kitchen and bathroom before measuring and installing the ceiling panel.
2. Determine the location of the electrical socket to facilitate the subsequent drilling work.
3. Be sure to reserve the power cord. Once the clip board is installed, making holes later on will affect the overall appearance.
4. During the installation process, pay attention to safety, wear protective tools, and cut off the power supply.
