Wooden Design Hot Stamping PVC Panel PVC Ceiling Wall Panels

Fix the wooden structures onto the ceiling to build the frame before installation the pvc panel (Recommended space between each horizontal wooden battens around 50cm(Aluminum keel also ok )

1.Measure the size of the installation space;

2.Cut suitable size for U clips /top clips ,install on by screws .

3.Cut the first pvc ceiling panel's siding soft tongue, make it close and insert to the clip,with screws on pvc ceiling panel and wood keel with 50cm distance .

4. same steps to put on screws and insert the pvc ceiling panel .
5. Make the hole on pvc ceiling panel as need to install the light .

Hot Tags: wooden design hot stamping pvc panel pvc ceiling wall panels, China wooden design hot stamping pvc panel pvc ceiling wall panels manufacturers, suppliers, factory